Product overview
FS S2800S switches integrate high-performance hardware with the FSOS platform and enhanced L2+ functions such as 802.1Q VLAN and port-based VLAN, QoS, IGMP Snooping, LACP link aggregation, Static Routing, etc. can meet the requirement of many scenarios in SMBs.
S2800S-8T2F-P comes with 8x 10/100/1000BASE-T ports, 2x1Gb SFP uplinks. All eight ports support IEEE 802.3af PoE and IEEE 802.3at PoE+ (up to 30W per port) for powering PD devices such as IP phones, wireless access points, Etc. In addition, the 2 SFP ports support connections to the devices of a higher layer.
S2800S-24T4F-P comes with 24x 10/100/1000BASE ports, 4 x 1Gb SFP Uplinks, it also complies with PoE+ standard. All 24 ports support IEEE 802.3af PoE and IEEE 802.3at PoE+ (up to 30W per port) for powering PD devices such as IP phones, wireless access points, Etc. In addition, the 2 SFP ports support connections to the devices of a higher layer.
S2800S-8T, delivers a compact, cost-effective solution for home and small business networks. Based on the high-performance hardware and FSOS platform, it supports functions such as ACL, DHCP, QoS, IGMP, LACP, Etc. It's simple management mode and flexible installation can meet the requirement of many scenarios.
S2800S-24T2F delivers a compact, cost-effective solution for home and small business networks. 2x 1Gb SFP ports meet the network expand needs, providing improved sustainability and a borderless network experience.
S2800S-48T4F delivers a compact, cost-effective solution for home and small business networks. 4x 1Gb SFP ports meet the network expand needs, providing improved sustainability and a borderless network experience.
Product highlights
Comply with IEEE802.3i/3u/3x/3z, IEEE802.3ab/ad, IEEE802.1P/1Q Standards
Supports QoS, Port Mirror, Link Aggregation Protocol
Support SNMP/RMON/Telnet
LED Indicators for Monitoring Power, Link, Activity, Speed
Support VLAN, ACL, QoS, etc.
Fanless Design, Always Working Silently (S2800S-48T4F and S2800S-24T4F-P are Not Included)
Platform details
Switch models and configurations
Figures 1 through 5 show the FS S2800S series switches.
Figure 1.
S2800S-8T, 8-Port Gigabit Ethernet L2+ Switch, 8 x Gigabit RJ45, Fanless
Figure 2.
S2800S-24T2F, 24-Port Gigabit Ethernet L2+ Switch, 24 x Gigabit RJ45, with 2 x 1Gb SFP Uplinks, Fanless
Figure 3.
S2800S-48T4F, 48-Port Gigabit Ethernet L2+ Managed Switch, 48 x Gigabit RJ45, with 4 x 1Gb SFP Uplinks
Figure 4.
S2800S-8T2F-P, 8-Port Gigabit Ethernet L2+ PoE+ Switch, 8 x PoE+ Ports @65W, with 2 x 1Gb SFPUplinks, Fanless
Figure 5.
S2800S-24T4F-P, 24-Port Gigabit Ethernet L2+ PoE+ Switch, 24 x PoE+ Ports @220W, with 4 x 1GbSFP Uplinks
Switch configurations and port density
Table 1 shows the FS S2800S (Without PoE) series configurations and port density.
Table 1. Switch configuration and port density
| FS P/N | S2800S-8T | S2800S-24T2F | S2800S-48T4F |
| Description | S2800S-8T, 8-Port Gigabit Ethernet L2+ Switch, 8 x Gigabit RJ45, Fanless | S2800S-24T2F, 24-Port Gigabit Ethernet L2+ Switch, 24 x Gigabit RJ45, with 2 x 1Gb SFP Uplinks, Fanless | S2800S-48T4F, 48-Port Gigabit Ethernet L2+ Managed Switch, 48xGigabit RJ45, with 4 x 1Gb SFP Uplinks |
| Port | |||
| 1G port density | - | 2 | 4 |
| RJ45 port density | 8 | 24 | 48 |
| Memory and processor | |||
| CPU | RTL8380M-VB-CG | RTL8382M | RTL8393M-VC-CG |
| DRAM | NT5CC128M8GN-DI | NT5CC128M8GN-DI | W631GG6KB-15 |
| Flash memory | 128MB | 128MB | 128MB |
| Latency | 16MB | 16MB | 16MB |
| Packet buffer | 4MB | 4MB | 4MB |
Note:
RJ45 ports can be used as 100M/1/2.5/5/10G ports for Ethernet connection, does not support 1G-T copper transceivers. SFP+ ports can be used for 1/10G connection.
Table 2 shows the FS S2800S (PoE) series configurations and port density.
Table 2. Switch configuration and port density
| FS P/N | S2800S-8T2F-P | S2800S-24T4F-P |
| Description | S2800S-8T2F-P, 8-Port Gigabit Ethernet L2+ PoE+ Switch, 8 x PoE+ Ports @65W, with 2 x 1Gb SFP Uplinks, Fanless | S2800S-24T4F-P, 24-Port Gigabit Ethernet L2+PoE+ Switch, 24 x PoE+ Ports @220W, with4x1GbSFP Uplinks |
| Port | ||
| 1G port density | 2 | 4 |
| RJ45 port density | 8 | 24 |
| Memory and processor | ||
| CPU | RTL8380M-VB-CG | RTL8382M |
| DRAM | NT5CC128M8GN-DI | NT5CC128M8GN-DI |
| Flash memory | 128MB | 128MB |
| Latency | 16MB | 16MB |
| Packet buffer | 4MB | 4MB |
Note:
RJ45 ports can be used as 100M/1/2.5/5/10G ports for Ethernet connection, does not support 1G-Tcoppertransceivers.
SFP+ ports can be used for 1/10G connection.
SFP+ ports can be used for 1/10G connection.
Power supplies and fans
The FS S2800S Series switches ship with the Single power supply as default.
Table 3 provides more details on the FS S2800S (Without PoE) series power supplies and fan specifications.
Table 3. Power supply and fan specifications
| Description | S2800S-8T | S2800S-24T2F | S2800S-48T4F |
| Power supply | Single power supply | Single power supply | Single power supply |
| Fan number | 0 | 0 | 1 |
| Max. power consumption | 12W | 25W | 39.6W |
| Power max rating | 9W | 15W | 35W |
| Input-voltage range and frequency | DC12V, 50/60Hz | AC100-240V, 50/60Hz | AC100-240V, 50/60Hz |
| Power supply efficiency | 0.8296 | 0.82 | ≥75% |
| Input current | 100Vac~240Vac | 100Vac~240Vac | 100Vac~240Vac |
| Output ratings | 12W | 25W | 39.6W |
| Output holdup time | - | 20mS | 1S |
| Power-supply input receptacles | - | - | - |
| Power cord rating | - | - | - |
| PoE standard | - | - | - |
| PoE power budget | - | - | - |
Note:
The FS S2800S Series switches ship with the Single power supply as default
Table 4 provides more details on the FS S2800S (PoE) series power supplies and fan specifications
Table 4. Power supply and fan specifications
| Description | S2800S-8T2F-P | S2800S-24T4F-P |
| Power supply | Single power supply | Single power supply |
| Fan number | 0 | 1 |
| Max. power consumption | 79.5W | 283W |
| Power max rating | 67.89W | 240W |
| Input-voltage range and frequency | AC100-240V, 50/60Hz | AC100-240V, 50/60Hz |
| Power supply efficiency | 0.85 | ≥92% |
| Input current | 100Vac~240Vac | 100Vac~240Vac |
| Output ratings | 79.5W | 283W |
| Output holdup time | 20mS | 20mS |
| Power-supply input receptacles | - | - |
| Power cord rating | - | - |
| PoE standard | IEEE 802.3af/at | IEEE 802.3af/at- |
| PoE power budget | 65W | 220W |
Table 5 lists the power cord information.
Table 5. Power cord information of S2800S Series Switches
|
Countries |
Power Cord Standard |
Male Plug |
Female Connector |
Voltage Compatibility |
Maximum Input Amps |
|
United States, Canada, Mexico, Puerto Rico, Guam, Japan, Virgin Islands (U.S.) |
US |
NEMA 5-15P |
IEC60320 C13 |
100-250VAC |
10A |
|
United Kingdom, Hong Kong, Singapore, Malaysia, Maldives, Qatar, India |
UK |
BS1363 |
IEC60320 C13 |
100-250VAC |
13A |
|
Continental Europe, South Africa, Switzerland, Italy, Indonesia |
EU |
CEE 7 |
IEC60320 C13 |
100-250VAC |
16A |
|
China, Australia, New Zealand, Argentina |
CN |
GB16A |
IEC60320 C13 |
100-250VAC |
10A |
Note:
Power cords are matched according to the delivery destination.
Switch performance
Table 6 shows performance specifications for the FS 2800S (Without PoE) series switches.
Table 6. Performance specifications
| Performance for all S2800S Series Switches | S2800S-8T | S2800S-24T2F | S2800S-48T4F |
| Switching capacity | 16 Gbps | 52Gbps | 104Gbps |
| Forwarding rate | 11.9 Mpps | 38.68 Mpps | 77.38Mpps |
| Total number of MAC addresses | 8000 | 8000 | 8000 |
| Jumbo frame | 10 K | 10 K | 10 K |
Table 7 shows performance specifications for the FS 2800S (PoE) series switches
Table 7. Performance specifications
| Performance for all S2800S Series Switches | S2800S-8T2F-P | S2800S-24T4F-P |
| Switching capacity | 20 Gbps | 56 Gbps |
| Forwarding rate | 14.88 Mpps | 41.66 Mbps |
| Total number of MAC addresses | 8000 | 8000 |
| Jumbo frame | 10 K | 10 K |
Product specifications
Table 8 shows the product specifications for the FS S8550 series switches.
Table 8. Product specifications
| Description | S2800S-8T | S2800S-24T2F | S2800S-48T4F |
| Environmental | |||
| Operating temperature | 0 to 50ºC (32 to 122°F) | 0 to 50ºC (32 to 122°F) | 0 to 50ºC (32 to 122°F) |
| Storage temperature | -40 to 70ºC (-40 to 158°F) | -40 to 70ºC (-40 to 158°F) | -40 to 70ºC (-40 to 158°F) |
| Operating humidity | 10% to 90% (Non-condensing) | 10% to 90% (Non-condensing) | 10% to 90% (Non-condensing) |
| Storage humidity | 5% to 95% (Non-condensing) | 5% to 95% (Non-condensing) | 5% to 95% (Non-condensing) |
| Temperature alarm | Supported | Supported | Supported |
| Physical specifications | |||
| Dimensions (HxWxD) |
1.73''x11.02''x7.09'' (44*280*180 mm) |
1.73''x11.02''x7.09'' (44*280*180 mm) | 1.73''x11.02''x7.09'' (44*280*180 mm) |
| Rack units (RU) | 1RU | 1RU | 1RU |
| Electrical | |||
| Voltage (auto ranging) | 12V | 12V | 12V |
| Frequency | 47Hz-63Hz | 47Hz-63Hz | 47Hz-63Hz |
| Current | 1A | 2.1A | 3.3A |
| Power rating (maximum consumption) | 12W | 25W | 39.6W |
| Mean-time between failures | |||
| MTBF (hours) | >200000 | >200000 | >200000 |
| Connectors | |||
| Connectors and cabling |
• 10/100/1000BASE-T ports: RJ-45 connectors, 4-pair Cat5E/Cat6/Cat6a UTP cabling • SFP transceivers: LC fiber connectors (single-mode or multimode fiber) |
||
| Power connectors |
• Customers can provide power to a switch by using the internal power at the back of the switch • Internal power supply connector: The internal power supply is an auto-ranging unit. It supports input voltages between 100 (115 for 1100WAC) and 240 VAC. Use the supplied AC power cord to connect theACpower connector to an AC power outlet |
||
| Standards | |||
| Standards | 802.3i, 802.3u, 802.3x, 802.3z, 802.3ab, 802.13ad, 802.1P, 802.1Q, RMON | ||
Table 9 shows the product specifications for the FS S2800S (PoE) series switches.
Table 9. Product specifications
| Description | S2800S-8T2F-P | S2800S-24T4F-P |
| Environmental | ||
| Operating temperature | 0 to 50ºC (32 to 122°F) | 0 to 50ºC (32 to 122°F) |
| Storage temperature | -40 to 70ºC (-40 to 158°F) | -40 to 70ºC (-40 to 158°F) |
| Operating humidity | 10% to 90% (Non-condensing) | 10% to 90% (Non-condensing) |
| Storage humidity | 5% to 95% (Non-condensing) | 5% to 95% (Non-condensing) |
| Temperature alarm | Supported | Supported |
| Physical specifications | ||
| Dimensions (HxWxD) |
1.73''x11.02''x7.09'' (44*280*180 mm) |
1.73''x11.02''x7.09'' (44*280*180 mm) |
| Rack units (RU) | 1RU | 1RU |
| Electrical | ||
| Voltage (auto ranging) | 53V | 53.5V |
| Frequency | 47Hz-63Hz | 47Hz-63Hz |
| Current | 1.5A | 5.3A |
| Power rating (maximum consumption) | 79.5W | 283W |
| Mean-time between failures | ||
| MTBF (hours) | >200000 | >200000 |
| Connectors | ||
| Connectors and cabling |
• 10/100/1000BASE-T ports: RJ-45 connectors, 4-pair Cat5E/Cat6/Cat6a UTP cabling • SFP transceivers: LC fiber connectors (single-mode or multimode fiber) |
|
| Power connectors |
• Customers can provide power to a switch by using the internal power at the back of the switch • Internal power supply connector: The internal power supply is an auto-ranging unit. It supportsinput voltages between 100 (115 for 1100WAC) and 240 VAC. Use the supplied AC power cordtoconnect the AC power connector to an AC power outlet |
|
| Standards | ||
| Standards | 802.3i, 802.3u, 802.3x, 802.3z, 802.3ab, 802.13ad, 802.1P, 802.1Q, RMON | |
Quality certification
At FS, our Quality Commitment lies in all aspects of processes, resources, and methods that enable us to build superior networks for our customers. Through a quality policy focusing on continuous improvement of products and services, we're able to achieve the highest levels of satisfaction for our customers. To that end, every FS employee is accountable for contributing to the value of the products and services we deliver.
Figures 6 shows some of the authoritative certifications obtained by FS S8550 Series Switches.
.svg)
Figure 6.
Warranty, service and support
FS S2800S Series Switches enjoy 4 years limited warranty against defects in materials or workmanship. For more information for FS Returns & Refunds policy, visit https://www.fs.com/policies/warranty.html or https://www.fs.com/policies/day_return_policy.html
FS provides a personal account manager, free professional technical support, and 24/7 live customer service to each customer.support.html
Professional Lab: Test each product with the latest and advanced networking equipment.
Free Technical Support: Provide free & tailored solutions and services for your businesses.
80% Same-day Shipping: Immediate shipping for in-stock items.
Fast Response: Direct and immediate assistance from an expert.
For more information, visit https://www.fs.com/service/fs_support.html
Ordering information
Table 10 provides the ordering information for S2800S series switches.
Table 10. Ordering information
|
FS P/N |
Product Description |
| S2800S-8T | S2800S-8T, 8-Port Gigabit Ethernet L2+ Switch, 8 x Gigabit RJ45, Fanless |
| S2800S-24T2F | S2800S-24T2F, 24-Port Gigabit Ethernet L2+ Switch, 24 x Gigabit RJ45, with 2 x 1Gb SFP Uplinks, Fanless |
| S2800S-48T4F | S2800S-48T4F, 48-Port Gigabit Ethernet L2+ Managed Switch, 48 x Gigabit RJ45, with 4 x 1Gb SFP Uplinks |
| S2800S-8T2F-P | S2800S-8T2F-P, 8-Port Gigabit Ethernet L2+ PoE+ Switch, 8 x PoE+ Ports @65W, with 2 x 1Gb SFP Uplinks, Fanless |
| S2800S-24T4F-P | S2800S-24T4F-P, 24-Port Gigabit Ethernet L2+ PoE+ Switch, 24 x PoE+ Ports @220W, with 4 x 1Gb SFP Uplinks |
Additional information
For more information about the S2800S Series Switches, contact your account manager or visit https://www.fs.com/search_result?keyword=S2800S
Document history
|
New or revised topic
|
Described in
|
Date
|
|---|---|---|
|
Updates to FS S2800S Series Switches Data Sheet
|
Updated all
|
11/20/2023
|
Comments
0 comments
Please sign in to leave a comment.